Categories

Manufacturers

Click Here to sign up for our newsletter

Tags

5Ghz Ubiquiti axis AP 2.4 airmax Camera Routerboard PoE Router

2A2440-RF

2A2440-RF

500mW 2 Piece 2.4GHz Outdoor Amp - A2440-RF

Availability: In Stock

A2440-RF

$291.00

Add to cart

More info

The Model AMP2440 is a 2.4 GHz waterproof bi-directional pole mounted amplifier. It is designed for use with 2.4 GHz Spread Spectrum radio modems and wireless LAN equipment. Consisting of a low noise receiver pre-amplifier and transmit power amplifier, the AMP2440 offers significant increases in operating range and performance. The unit is ideal for use with any 2.4 GHz Frequency Hopping or Direct Sequence Spread Spectrum Wireless LAN devices or radio modems. The remote mounting capability allows it to be located right next to the antenna which places the full transmit power where it is most effective. The receiver pre-amp boosts the received signal at the antenna. The latest low-noise amplifier (LNA) technology is used, improving the receiver sensitivity by several dB! This gain also compensates for the cable loss from the amp to the radio modem. The amplifier automatically switches between the recieve and transmit amplification modes. Using the AMP2440 allows for the use of inexpensive transmission cable up to 300 feet between the radio modem and the pole mounted amp! Its waterproof enclosure will provide years of reliable operation. The amplifier gets its DC power through the coax cable using the DC Power Injector, which is located indoors near the radio modem. No separate power cable is needed for the ampifier. Features Transmit input levels from 3.2mW to 100mW Up to 16dB transmitter power gain Low noise receiver pre-amp with 16 dB gain 100% Weatherproof Cast Aluminum Case Polyurethane gasket for watertight seal Amp Mountable on poles from 3/4” through 3” diameter DC Power carried up through the coax cable Power and Transmit LEDs on both the amp and the DC power injector Built-in Lightning Protection DC Surge Protection Heavy Duty “N” Connectors 1 Year Warranty Made in the USA General Specifications Operating Range 2401 - 2483 MHz Operating Mode Bi-directional, Time Division Duplex. Senses RF carrier from transmitter and automatically switches from receive to transmit mode. Connectors N-Female Indicators TX and RX LEDs on both the amplifier and the DC power injector Lightning Protection Direct DC ground at antenna connector and in the DC injector DC Surge Protection 600 Watt TVS at 12 VDC input from transmission cable Transmit Amplifier Specifications Transmit Gain 14 dB nominal for -F / 16 dB for -2, -4 and -5 versions Frequency Response +/-1 dB over operating range Max Transmit Output Power 400 mW (+27 dBm) for the -4 / 250 mW (+24 dBm) for the -2 / 500 mW (+27 dBm) for the -5 / 500 mW (+27 dBm) for linear operation Transmit Input Power 3.2 mW minimum, 100mW maximum Receiver Low Noise Amplifier Specifications Receive Gain 16 dB typical Frequency Response +/-1 dB over operating range Noise Figure 3.5 dB typical Environmental/Mechanical Specifications Temp. Range -20° C to +60° C Power 11 to 14VDC @ 800 ma peak 400 ma avg. Amplifier Dimensions 4.53” x 2.55” x 1.20” DC Power Injector Dimensions 4.42” x 2.40” x 1.22” Mounting Bracket For Amplifier Accommodates pole/mast diameters from 3/4” to 3” Kit Weight Approx. 1.5 lb. with U-bolts Installation and Operation Manual Product Reviews Write an online review and share your thoughts.

Comments

No customer comments for the moment.

Write your review

2A2440-RF

2A2440-RF

500mW 2 Piece 2.4GHz Outdoor Amp - A2440-RF

Write your review